RCBS Full Length Die Set .25-06

RCBS Full Length Die Set .25-06

This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions. It sizes the outside of the case, de-primes and expands the neck to accept the bullet. The die has vents to prevent case damage caused by trapped air and for excessive lubricant. Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing. The included Seater Die has a built-in roll crimper to secure the bullet at the same time as it’s seated.

• Standard 7/8″-14 Thread
• Proprietary Die Steel
• Set includes Full-Length Sizing die and Bullet Seating Die
• Sizing die brings cases to SAAMI minimum cartridge dimensions
• Ships in Green Die Box
• Made in USA
  RCBS GROUP A FULL-LENGTH SIZING DIE SET

  

  Group A Full-Length Sizing dies size your brass to SAAMI specifications for optimal chambering and accuracy. The inside is beautifully finished to facilitate ease of sizing and extraction from the die while not scratching your valuable brass.

  

  The Group A full-length sizing die features an expander-decapping unit. The decapping pins are replaceable should you break one or need a different size.

  

  RCBS Group A die sets are manufactured of the finest steel right here in the United States in our Oroville, California factory.

  

  The Group A seater die implements a bullet seater plug that adjusts the bullet seating depth to your desired case overall length (COAL), and the inside of the body has a crimp taper to crimp your cartridge if you desire.